Literature      2 Sitemap

• Heavy Duty Construction

• Deck and Lip are 3/8" thick 55,000 lb. minimum yield steel tread plate

• Full width hinge tubing and pin provide total load distribution

• Rugged steel bump blocks with structural center support provide maximum impact resistance

• No special tools required - Lubricated hinge tubing

• Reduced Maintenance

• 110v/1ph/1hp/60Hz, Self-contained Power-pack

• Service Range: +/- 5" from dock height

• Capacities: 20,000 / 25,000 / 30,000 lbs.

• Available Widths: 66", 72", 78" and 84"

•       Warranty

• Fully Hydraulic operation - No pulling or lifting required

• No back injuries or mashed fingers from handling portable Dockboards

• Returns to stored position when truck departs

• 220v-460v/3ph/1hp/60Hz, Self-contained Power-pack

• 17" Lip - Recommended for use with refrigerated trailers

• Flat plates: Recommended for use with pallet jacks, specialty carts or forklift applications where forks will be on or near the floor during operation

• Installation accessories: Approach plates, formed angles

• Steel face plate on bumper

• USPS (US Post Office) Specified Units: Equipped with 2" Cart Guard

Hydraulic unit to be, Aaron-Bradley Model _____________. Capacity to be ____________ lbs. Unit to be ____" W x 27-3/4" working span with a 12-3/4" lip projection (17" lip has 14-3/4" projection). Unit to automatically store upon truck departure. Unit mounts externally to dock face. Power-pack is self contained.

Steel Dock Edge Facing (Embedded Channel)

To help you determine the most effective and best suited installation for your particular conditions, our engineers will evaluate your operation and submit complete recommendations and cost estimates.

Fully automatic with recycle feature. Remove end load, if any, form truck while unit is in stored position. Raise unit to vertical position by activating control. Release control and leveler will lower to truck. When truck pulls away unit will return to stored position. Note: To recycle leveler with truck in position simply activate control until lip section contracts and is clear of truck then release control unit will store automatically.

Over 25 years experience in manufacturing of Scissor Tables & Loading Dock Equipment

• When it comes to safety talk to the experts for the proper solution to your material handling needs

• Conveniently located facilities allow for expedited shipments and economical freight rates

• Application Engineers are readily available for special or unique design applications

Note: Clicking on links will take you out of the Aaron-Bradley web site

P.O. Box 1028 ♦ Franklin, TN ♦ 37065-1028 ♦ 800-394-5944 ♦ 615-371-1774 ♦ Fax: 615-371-1754

Contact Us By E-mail: sales@aaronbradley.com

Back to Top